KL510 Top Hammer Drilling Rig,Diesel Electric Double Surface DTH Drilling Rig

Chinese

English

KL510 Top Hammer Drilling Rig

Home » Products » Drill Rigs and Rock Drills » KL510 Top Hammer Drilling Rig

Get Operation Manual

Kaishan KL510 top hammer drilling rig is equipped with standard drill rod of 45/38mm diameter to drill vertical, inclined and horizontal blast holes of 64-115 mm.

Drilling rig uses efficient Kaishan screw air compressor with fully independent intellectual property rights to realize environmental protection and energy saving.

The power unit of drilling rig is at the tail end of rotating rack in the upper layer to be symmetrical with drill boom and propelling beam, providing mutual balance, no matter which direction the drill boom and propelling beam are in.

Travelling, crawler balance and frame rotation of drilling rig can be equipped with optional wireless remote control function for operation outside the cab.

Technical Parameters of KL510 Top Hammer Drilling Rig

Dimensions and Weight
Transportation size(longwidthhigh)	1050024503200mm
Weight	16500kg
Hinged drill boom and chassis
Ground clearance	430mm
Track rotation	-
Drill hole covering area	26.5㎡
Track oscillation	10°up,10°down
Travelling speed	0-3.5km/h
Climbing capacity	≤30°
Traction force	120kN
Power unit
Engine	QSC8.3-C240-30
Number of cylinders	6
Power	179kW/2200rpm
Transmission type	Front-rear output
Hydraulic pump	2×Variable piston pump+2×Gear pumps
Screw air compressor	kaishan
Capacity	8.5m³/min
Working pressure	10bar
Fuel tank	340L
Dust collection system
Dust collector ability and vacuum degree	20m³/min; 1000mm Water column
Filter quantity/ material	8pcs / fiber
Filter area	7㎡
Hydraulic motor power	7.5kW
Hydraulic Rock Drills
Model	HC95LQ
Impact power	24kW
Maximum Impact Pressure	180-200bar
Impact frequency	48-57Hz
Maximum torque	955Nm
Maximum rotation pressure	210bar
Maximum rotation speed	150rpm
Bit shank lubrication	Air/ oil mist
Oil consumption for lubrication	15 drop /min
Drilling diameter	64-115mm
Hydraulic system
Traveling and drilling	Load sensing type
Filter precision	10μm
Cooling capacity	+50° Ambient temperature
Hydraulic oil tank	250L
Drill boom, propelling beam and rod changer
Boom lift	94°
Boom swing	-18°/ 50°
Folding boom lift	120°
Feed swing	-93°/ 20° -20°/94°
Feed tilt	120°
Feed extenstion	1353mm
Rock drill stroke	4150mm
Max. feed force	19kN
Propulsion mode	Motor-roller chain
Economic drilling depth	25m
Number of rods	6+1
Drill rod model	T45/T38*3360
Lubrication of drill rod thread	air lubricating pump
Control System
Travelling	Hydraulic pilot control
Drill boom	Direct hydraulic control
Rock drilling	Pilot control (Electric/ hydraulic)
Drilling control	Variable
Impact control	shock pressure control
Anti-sticking	Electric/Hydraulic
Voltage	24V, DC
Cabin
Cabin safety	Meet the requirement of FOPS and ROPS
Control function	Drilling, travelling, drill boom action and rod changer
Seat	Adjustable
Air conditioning	Standard
Entertainment	Radio+MP3